The kiln company introduced the use of ceramic kilns in the firing of ceramics: everyone knows that kilns are made of refractory materials to burn products, and are an essential facility in ceramic art molding. So how does it work in the process of firing ceramics? I will briefly introduce it to you now.
During the operation of the kiln, a small amount of ammonia water is required, energy consumption is relatively low, and the investment cost and project operating cost are low. At the same time, the use of technology greatly reduces the temperature of the bag dust collector and extends its service life. % ～ 60%. It has the advantages of energy saving, environmental protection, safety, thick products are easy to burst, and the firing speed is fast. In addition, the kiln can also set the firing curve arbitrarily, making the ceramic smelting easy to operate. The kiln has a faster fire speed during the firing process; the temperature difference between the cross sections of each belt is smaller; the fluctuation range of the temperature curve is stable and reasonable; the use of fuel is small, and the power matching the combustion fan is reduced to a minimum; The production of the kiln is in a state of high output, high quality, energy saving and environmental protection.
The production and application of kilns in the firing of ceramics will promote the ceramic industry to a small batch, fast fashion, and multi-batch phase. Using alkaline liquid and ammonia water as desulfurization and denitration agent, the process has good absorption effect, and the amount of desulfurization and denitration agent can be adjusted according to the change of kiln coal type to ensure the realization of high desulfurization and denitration rate.
The above introduction about the use of kilns in firing ceramics is now here. If you have any questions about products, please feel free to contact us at any time, we will provide you with comprehensive product information.
